JVC RX-DP20VBK manual Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 61) in addition to the connections using cables with RCA pin plugs (see page 11).

•Aim the remote control directly at the remote sensor on the receiver.

•To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 27.)

•Refer also to the manuals supplied with your components.

When using the remote control:

–Set ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 1” or “ZONE 2” correctly.

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either ZONE 1 or ZONE 2) for a while.

–The CONTROL button can change the remote control operation mode without changing the source.

Each time you press the button, the remote control operation mode changes in the sequence—VCR1 = TAPE = CDR = CD DISC = (back to the beginning).

	LEARN	TRANSMIT			LEARN	TRANSMIT
ZONE 1		ZONE 2		ZONE 1		ZONE 2
LEARN	TRANSMIT			LEARN	TRANSMIT
		STANDBY	ON			STANDBY	ON
ZONE 1	ZONE 2			ZONE 1	ZONE 2
ZONE 1	ZONE 2	TV/CATV/DBS	VCR 1	ZONE 1	ZONE 2	TV/CATV/DBS	VCR 1
ON/OFF	ON/OFF			ON/OFF	ON/OFF
		STANDBY/ON	STANDBY/ON			STANDBY/ON	STANDBY/ON

ZONE 1 ZONE 2

Ex. When you press FM/AM	Ex. When you press FM/AM
with ZONE 1/ZONE 2	with ZONE 1/ZONE 2
(LEARN/TRANSMIT)	(LEARN/TRANSMIT)
selector set to “ZONE 1.”	selector set to “ZONE 2.”

Tuner

You can always perform the following operations:

FM/AM	: Tunes in to the last station of the last
	selected band. Each time you press the
	button, the band alternates between FM
	and AM.

After pressing FM/AM, you can perform the following operations:

1 – 10, +10	: Selects a preset channel number directly.
	For channel number 5, press 5.
	For channel number 15, press +10, then 5.
	For channel number 20, press +10, then 10.
TUNING UP/DOWN	: Tunes in to stations.
FM MODE	: Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations:

THX	: Selects the THX modes.
SURROUND	: Selects the Surround modes
EX/ES/7.1	: Selects the 7.1-channel reproduction
	modes.
DSP	: Selects the DSP modes.
SURR/DSP OFF	: Deactivates the THX/Surround/DSP
	modes.
ANALOG DIRECT	: Turns on or off Analog Direct.
ANALOG/DIGITAL INPUT : Selects the analog/digital inputs.
CC CONVERTER	: Turns on or off CC Converter.

After pressing SOUND, you can perform the following operations:

TEST: Turns on or off the test tone output.

FRONT•L then LEVEL +/– : Adjusts the left front speaker channel output level.

FRONT•R then LEVEL +/– : Adjusts the right front speaker channel output level.

SUBWFR then LEVEL +/– : Adjusts the subwoofer output level.

CENTER then LEVEL +/– : Adjusts the center speaker channel output level.

SURR•L then LEVEL +/– : Adjusts the left surround speaker channel output level.

SURR•R then LEVEL +/– : Adjusts the right surround speaker channel output level.

SURR BK•L then LEVEL +/– : Adjusts the left surround back speaker channel output level.

SURR BK•R then LEVEL +/– : Adjusts the right surround back

	channel speaker output level.
EFFECT	: Selects the effect level.
LIVENESS	: Selects the liveness.

Notes:

•After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

•When you press LEVEL + or LEVEL –, the corresponding speaker name appears on the remote’s display.

71