JVC RX-DP20VBK • When Dolby Pro Logic II Music is activated, • When Neo:6 Music is activated

• When Dolby Pro Logic II Music is activated:

Select and adjust the following items:

CENTER EQ: In movie theaters, the screen works as the high- frequency cut filter of the center channel since the center speakers are located behind the screen and the center channel sounds have to pass through the screen.

•Select “ON” to cut off the high frequency of the center channel as is done in a real movie theater.

•Select “OFF” not to use this function.

PANORAMA: Extend the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging.

•Select “ON” to turn on this function.

•Select “OFF” not to use this function.

CENTER WIDTH: Adjust the center image so it may be heard only from the center speaker, only from the left/right speakers as a “phantom” center image, or various combinations of all three front speakers. As the number increases, the “phantom” effect become stronger.

(Normally select “3.” Adjustable range: OFF, 1 to 7)

• Select “OFF” not to use this function.

DIMENSION: Allows you to gradually adjust the sound field either towards the front or towards the rear. As the number increases, the sound field moves towards the front.

(Normally select “4.” Adjustable range: 1 to 7)

• When Neo:6 Music is activated:

Select and adjust the following items:

CENTER EQ: In movie theaters, the screen works as the high- frequency cut filter of the center channel since the center speakers are located behind the screen and the center channel sounds have to pass through the screen.

•Select “ON” to cut off the high frequency of the center channel as is done in a real movie theater.

•Select “OFF” not to use this function.

CENTER GAIN: Adjust the sound localization of the center channel. As the number increases, center channel will be localized clearly.

(Normally select “0.2.” Adjustable range: 0 to 0.5)

•When one of the other Surround modes is activated,

or “DVD MULTI” or “EXT 7.1CH” is selected (without DSP mode):

Select and adjust the following items:

CENTER EQ: In movie theaters, the screen works as the high- frequency cut filter of the center channel since the center speakers are located behind the screen and the center channel sounds have to pass through the screen.

•Select “ON” to cut off the high frequency of the center channel as is done in a real movie theater.

•Select “OFF” not to use this function.

CENTER ALIGN: Align the vertical localization of the center channel signals (mainly human voices are recorded) at the same height as for the front speakers.

•Select “ON” when you cannot feel as if the actors or singers are speaking or singing on the screen.

•Select “OFF” not to use this function.

To adjust the DSP effect levels using the 10 keys

You can also use the 10 keys on the remote control to adjust the DSP effect levels (“EFFECT” and “LIVENESS”).

Once you adjust their levels using the following procedure, the adjustments you have done on the Adjustment Menu will be also changed.

From the remote control ONLY:		SOUND
1.	Press SOUND.
	The 10 keys are activated for sound
	adjustments.
2.	Press EFFECT repeatedly to adjust the	EFFECT
		3
	overall level of the effect (1 to 5).

3. Press LIVENESS repeatedly to adjust the	LIVENESS
	6
liveness (1 to 5).

50