Yamaha CLP-F01 owner manual Effect Midi Map, Midi Parameter Change table Effect

ccH = don’t care (under 7FH) F7H = End of Exclusive

<Table 1>

MIDI Parameter Change table (SYSTEM)

Address (H)	Size (H)	Data (H)		Parameter	Description	Default value (H)
00 00 00	4	020C - 05F4(*1)		MASTER TUNE	-50 - +50[cent]	00 04 00 00
01					1st bit 3 - 0 ➝ bit 15 - 12	400
02					2nd bit 3 - 0 ➝ bit 11 - 8
03					3rd bit 3 - 0 ➝ bit 7 - 4
					4th bit 3 - 0 ➝ bit 3 - 0
04	1	00	- 7F	MASTER VOLUME	0 - 127	7F
05	1	—		—
06	1	34	- 4C(*2)	TRANSPOSE	-12 - +12[semitones]	40
7E		00		XG SYSTEM ON	00=XG system ON
7F		00		RESET ALL PARAMETERS	00=ON (receive only)

TOTAL SIZE 07

*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.

*2: Values from 28H through 33H are interpreted as -12 through -1. Values from 4DH through 58H are interpreted as +1 through +12.

<Table 2>

MIDI Parameter Change table (EFFECT 1)

Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.

Address (H)	Size (H)	Data (H)	Parameter	Description	Default value (H)
02 01 00	2	00-7F	REVERB TYPE MSB	Refer to Effect MIDI Map	01(=HALL1)
		00-7F	REVERB TYPE LSB	00 : basic type	00
02 01 40	2	00-7F	VARIATION TYPE MSB	Refer to Effect MIDI Map	00(=Effect off)
		00-7F	VARIATION TYPE LSB	00 : basic type	00

• “VARIATION” refers to the EFFECT on the panel.

<Table 3>

MIDI Parameter Change table (MULTI PART)

Address (H)	Size (H)	Data (H)	Parameter	Description	Default value (H)
08 nn 11	1	00 - 7F	DRY LEVEL	0 - 127	7F

nn= Part Number

•Effect MIDI Map

REVERB
	MSB	LSB
ROOM	02H	10H
HALL 1	01H	10H
HALL 2	01H	11H
STAGE	03H	10H
Sound board	03H	12H
EFFECT
	MSB	LSB
CHORUS	42H	10H
PHASER	48H	10H
TREMOLO	46H	10H
DELAY	05H	10H

72 CLP-F01 Appendix