2AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the Clavinova’s speakers. Refer to the diagram below and use audio cables to make the connec- tions.
CAUTION
When the Clavinova’s AUX IN jacks are connected to an external device, first turn on the power to the external device, then to the Clavinova. Reverse this order when you turn the power off.
Clavinova
phone plug (standard)
R 
L/L+R
AUX IN
AUX OUT
AUX IN
phone plug 
(standard)
Tone Generator
audio cable
3TO HOST jack
This jack allows direct connection to a personal computer. (Refer to “Connecting a personal computer” on page 54 for more information.)
4HOST SELECT switch
This switch should be set according to the type of connected MIDI device or per- sonal computer. (Refer to “Connecting a personal computer” on page 54 for more information.)
5MIDI [IN], [OUT], [THRU] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Make sure you set the HOST SELECT switch to MIDI when you use these connec- tors.
(Refer to “About MIDI” on page 51 for more information.)
NOTE
The Clavinova’s [MASTER VOLUME] and [BRILLIANCE] control settings affect the input signal from the AUX IN jacks, but the [REVERB] and [EFFECT] settings do not.
NOTE
If you connect the Clavinova to a monaural device, use only the
