F4. Split Mode Functions
This menu enables you to make various detailed settings for Split mode.
By changing the split point or other setting, you can optimize the settings for the songs you play.
You can make these settings for each combi- nation of voices individually.
1.Select the voices in Split mode and engage
Function mode and select 
.
2.Press the [+/YES] button to engage the Split mode function’s
NOTE
If Split mode is not engaged, 
will appear instead of 
and you will be unable to select Split mode functions.
Also note that you must exit Function mode before you can engage Split mode.
Sub-mode
Split Point
Setting range: The entire keyboard
Normal setting: F 2
Set the point on the keyboard that separates the right and
•Instead of pressing the
•If Function mode is not engaged, you can change the split point to any other key by pressing the key while holding the [SPLIT] button (page 29).
•An example of a key name indication for a split point
(F 2) | (G2) | (A 2) | ||
|
|
|
|
|
followed by |
| followed by | ||
a high bar if sharp | a low bar if flat | |||
Split Balance
Setting range: 0 – 20 (A setting of “10” produces an equal balance between the two Split mode voices. Settings below “10” increase the volume of the left voice in relation to the right voice, and set- tings above “10” increase the volume of the right voice in relation to the left voice.)
Normal setting: Different for each voice combina- tion.
The volume level of the two voices combined in Split mode can be adjusted as required.
Right Voice Octave Shift
Left Voice Octave Shift
Setting range: –1, 0, 1
Normal setting: Different for each voice combination You can shift the pitch up and down in octave steps for the Right Voice and Left Voice independently. Make a set- ting depending on the note range of the songs you play.
Right Voice Effect Depth
Left Voice Effect Depth
Setting range: 0 – 20
Normal setting: Different for each voice combination These functions make it possible to individually set the depth of the effect for the left and right Split mode voices.
The effect depth settings cannot be changed unless the [EFFECT] is ON. You must exit Function mode before you can turn on an [EFFECT].
Damper Pedal Range
Setting range: ALL (for both voices) 1 (for the right Voice) 2 (for the left Voice)
Normal setting: ALL
The Damper Pedal Range function determines whether the damper pedal affects the right voice, the left voice, or both the left and right voices in Split mode.
Reset
This function resets all Split mode functions to their default values. Press the [+/YES] button to reset the val- ues.
TIP
SHORTCUT:
You can jump directly to Split mode functions 
by press- ing the [TEMPO/FUNCTION#] button while holding the [SPLIT] button.
To exit Function mode, you still need to press the [TEMPO/ FUNCTION#] button so that the TEMPO indicator lights up.
