| HOW TO USE THE MANUAL MODE |
| 5 | Follow your progress with the displays. | ||||||||||||
|
|
|
|
|
|
|
|
|
|
| The lower left |
| ||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
| Insert the key into the console. |
|
|
|
| ||||||||||
| 1 |
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
| exercise, the |
| |||||
|
| See HOW TO TURN ON THE POWER on page |
|
| lower left display |
|
|
|
|
| ||||||
|
|
|
|
|
|
| ||||||||||
|
| 11. |
|
|
|
|
|
|
|
| can show the |
|
|
| ||
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
| elapsed time and |
| ||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
| Select the manual mode. |
|
| the distance that | |||||||||||
| 2 |
|
| |||||||||||||
|
|
| you have walked or run. | |||||||||||||
|
| When the key is |
|
|
|
| The lower right | |||||||||
|
|
|
|
|
|
|
|
|
| |||||||
|
| inserted, the |
|
|
|
| ||||||||||
|
| manual mode will |
|
|
|
| can show the speed of the walking belt and the | |||||||||
|
| be selected. If |
|
|
|
|
|
|
|
| approximate number of calories that you have | |||||
|
|
|
|
|
|
| ||||||||||
|
| you have se- |
|
|
|
|
|
| burned. The display also shows your heart rate | |||||||
|
|
|
|
| ||||||||||||
|
| lected a pro- |
|
|
|
| when you use the pulse sensor (see step 6). | |||||||||
|
|
|
|
|
| |||||||||||
|
| gram, reselect |
|
| When you use the treadmill’s upper body arms, | |||||||||||
|
| the manual mode by pressing the Program Select |
|
| ||||||||||||
|
| button once or twice, until only zeros appear in the |
|
| press the CROSS WALK button so the indicator | |||||||||||
|
| displays. |
|
| on the button is lit. The console will then include | |||||||||||
|
|
|
|
|
|
|
|
|
|
| your upper body exercise as it counts the approxi- | |||||
| Start the walking belt. | mate number of calories you have burned. | |
3 | |||
|
To start the walking belt, press the Start button, the Speed increase button, or one of the ten num- bered buttons.
If the Start button or the
Speed increase button is pressed, the walking belt will begin to move at 1 mph. As you exercise,
change the speed of the
walking belt as desired by pressing the Speed in- crease and decrease buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected speed setting.
If one of the ten numbered buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button. The time will begin to flash in one of the displays. To restart the walking belt, press the Start button, the Speed increase button, or one of the ten num- bered buttons.
4 Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the Incline increase or decrease button until the de- sired incline level is reached.
The upper
Note: While information is shown in the upper dis- play, the same information will not be shown in the lower left or right display.
To reset the displays, press the Stop button, re- move the key, and then reinsert the key.
Note: The console can display speed and dis- tance in either kilometers
or miles. To see which unit of measurement is selected, first remove the
key, hold down the Stop button, and then reinsert the key into the console; after you hear a tone, re- lease the Stop button. An “M” for metric kilometers or an “E” for English miles will appear in the lower right display. Press the Speed increase button to change the unit of measurement if desired. When the desired unit of measurement is selected, re- move the key and then reinsert it.
12
