2. Attach two Round Base Pads (57) to the base of | 2 |
| |
the right Upright (69) with two 1" Tek Screws |
| ||
|
| ||
(39). |
| 64 | |
|
| ||
Attach a Wheel (66) to the base of the right | 69 | 66 | |
Upright (69) with a Wheel Bolt (64) and a Wheel | |||
| |||
|
| ||
Nut (32) as shown. Do not overtighten the |
| 32 | |
Wheel Bolt; the Wheel should turn freely. |
| ||
|
| 39 | |
|
| 57 | |
| 57 | 39 | |
3. With the help of a second person, carefully tip | 3 |
| |
the treadmill onto its right side. Do not fully fold |
| ||
|
| ||
the treadmill until it is completely assembled. |
| 69 | |
|
| ||
Insert the other Extension Leg (63) into the base |
|
| |
of the Uprights (69). Hold an Extension Leg Nut |
| 93 | |
(46) in the bottom of the Extension Leg, and |
| ||
| 101 | ||
thread a 2.25” Bolt (93) with a 5/16” Star |
| ||
|
| ||
Washer (101) into the top of the Extension Leg. |
|
| |
Next, thread a 2.75” Bolt (100) with a 5/16” Star | 101 |
| |
Washer (101) into the bottom of the Extension |
|
| |
leg. Firmly tighten the Bolts. |
| 46 | |
|
| ||
| 100 | ||
|
| 63 | |
4. Attach two Round Base Pads (57) to the base of | 4 |
| |
the left Upright (69) with two 1" Tek Screws (39). |
| ||
|
| ||
Attach a Wheel (66) to the base of the left | 66 |
| |
Upright (69) with a Wheel Bolt (64) and a Wheel | 64 |
| |
Nut (32) as shown. Do not overtighten the |
| 69 | |
Wheel Bolt; the Wheel should turn freely. |
|
| |
| 32 |
| |
| 39 |
| |
| 57 | 57 | |
|
| 39 | |
| 7 |
| |
