Sony NSZ-GT1 setup guide Important Safety Instructions

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer'sinstructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet. 1O)Protect the power cord from being

walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 )Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart! apparatus combination to avoid injury from tip-over.

(j)

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Precautions

On placement

•Place the unit in a location with adequate ventilation to prevent heat build-up in the unit.

•Do not place the unit on a soft surface such as a rug that might block the ventilation holes.

•Do not place the unit and AC adapter in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

•Do not place the unit outdoors, in vehicles, on ships, or on other vessels.

•If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit. Should this occur, the unit may not operate properly. In this case, remove the disc and leave the unit turned on for about half an hour until the moisture evaporates.

•Do not install the unit in an inclined position. Itis designed to be operated in a horizontal position only.

•Do not place metal objects in front or on the left side of the unit. It may limit reception of radio waves.

•Do not place the unit in a place where medical equipment is in use. It may cause a malfunction of medical instruments.

•If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function.

•Do not place heavy or unstable objects on the unit.

•Do not insert any objects other than discs inside the disc slot. Doing so may cause damage to the unit or the object.

•Take out any discs when you move the unit. If you don't,the disc may be damaged.

•Disconnect the AC power cord and all other cables from the unit when you move the unit.

•During operation the AC adapter has to be placed on a surface with LED side up and label side down.

3