Changing the USB connection setting (USB Bus Powered)
Depending on the computer you are using, if the power supply is insufficient, incomplete data transfer may occur from the computer to your Network Walkman. In this case, setting the USB connection (USB Bus Powered) to
Nx button
Shuttle switch
to > 
to .
SEARCH/
MENU button
1 Press and hold the SEARCH/ MENU button for half a second in stop mode.
The menu screen is displayed.
Repeat Mode
Sound
Volume Mode
2 Rotate the Shuttle switch to select “Advanced Menu>”, and press the Nx button to confirm.
3 Rotate the Shuttle switch to select “USB Bus Powered>”, and press the Nx button to confirm.
4 Rotate the Shuttle switch to select the setting you want and press the Nx button to confirm.
USB Bus Powered
High-power500mA
Low-power 100mA
To cancel the Menu mode
Press the SEARCH/MENU button to return the screen to the previous stage. Press repeatedly to exit menu mode.
zTips•When you connect the Network Walkman to a notebook computer, connect the notebook computer to a power supply.
•The charging time will be longer if the “USB Bus Powered” is set to
38