Troubleshooting (continued)

Other

Symptom

Cause/Remedy

There is no beep sound when your

BEEP is set to “OFF.”

Network Walkman is operated.

c In the menu mode, set “BEEP” to “ON” (page 37).

 

 

“Memory Stick” cannot be inserted

• The “Memory Stick” is being inserted in the wrong direction.

into the slot.

c Be sure to insert “Memory Stick” in the right direction on your

 

Network Walkman (page 15, 19).

 

• You labelled the “Memory Stick”.

 

c Do not label the “Memory Stick”.

 

 

The current time is reset.

You did not operate your Network Walkman for a long period without charging it.

cThis is not malfunction.

Your Network Walkman, the USB cradle or the recording USB cradle gets warm.

The battery is being charged or just charged.

cYour Network Walkman, the USB cradle or the recording USB cradle may get warm when the battery is being charged or just charged because of quick charge.

“Memory Stick” used on other devices cannot be used.

“Memory Stick” has been formatted on the other device such as a computer.

cTransfer necessary data to other memory such as a computer’s hard disk and reformat “Memory Stick” on your Network Walkman (page 44).

Groups in “Memory Stick” cannot be found.

The data stored in the “Memory Stick” or the built-in flash memory were edited using a device that does not support the Group function.

cRegrouping before connecting to the computer may restore the groups (page 42).

Audio files stored in “Memory Stick” cannot be played using other device supporting “Memory Stick”.

You are trying to play ATRAC3plus format files using a device that does not support the ATRAC3plus format.

cATRAC3plus format files can be played only on devices supporting the ATRAC3plus format.

52