n 43 N

Using Your VAIO Computer

Before you use the remote control

Before using the remote control, you need to insert the supplied AA batteries and connect the remote sensor to enable communication between the computer and the remote commander.

To insert batteries

1Turn the remote commander over.

2Press in the tab (1) and lift the battery cover up.

3Insert the supplied two AA batteries into the remote control.

4Align the battery cover to the remote control.

5Press down until the cover clicks into place.

✍

If the remote control does not operate properly, you may need to replace the batteries. When the remote control is not being used for extended periods of time, remove the batteries to avoid possible damage from battery leakage.