Sony PCG-FRV manual Press the Down Arrow key to select Get Default Values. The

Troubleshooting Your Computer

3Press the Down Arrow key to select System Time, and then set the time (hour: minute: second). Press Enter.

4Press the Right Arrow key to select the Exit tab, and then press the Down Arrow key to select Get Default Values.

5Press Enter. The Setup Confirmation window appears.

6Select Yes, and press Enter.

7Select Exit (Save Changes), and press Enter. The Setup Confirmation window appears again.

8Select Yes, and press Enter. The computer restarts.

✍If this occurs on a regular basis, contact Sony Computing Support (http://www.sony.com/pcsupport).

Why does the message, “Operating system not found” appear when my computer starts, and why won’t Windows start?

❑If you have connected an external floppy disk drive to the computer, make sure there is no disk in the floppy disk drive (non-bootable).

❑If a non-bootable floppy disk is in the drive, follow these steps:

1 Turn off the computer, and remove the floppy disk.

2 Restart the computer and confirm that the Windows® operating system starts properly.

❑If Windows still does not start, follow these steps to initialize the BIOS: 1 Remove any floppy disk from the floppy disk drive.

2 Turn off the computer.

3 Remove any peripheral devices connected to the computer.

4 Restart the computer.

5 Press F2 when the Sony logo appears. The BIOS Setup window appears.

6 Press the Right Arrow key to select the Exit menu.

7 Press the Down Arrow key to select Get Default Values. The

message Load default values for all SETUP items appears.

57