Sony PCG-FX120 manual Owner’s Record, Safety Information

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. i.LINK is a SONY trademark used only to designate that a product contains an IEEE 1394 connector. All products with an i.LINK connector may not communicate with each other.

All other trademarks are trademarks of their respective owners.

Owner’s Record

The model number and serial number are located on the bottom of your Sony VAIO® Notebook. Refer to the model and serial number when you call your Sony Service Center.

Model Numbers: PCG-9512, PCG-9522, PCG- 9532, PCG 9542, PCG-9552, PCG-951A, PCG-952A, PCG-953A, PCG-954A, PCG- 955A

Serial Number:________________________

Safety Information

WARNING

❑To prevent fire or shock hazard, do not expose your notebook computer to rain or moisture.

❑To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

❑Never install modem or telephone wiring during a lightning storm.

❑Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

❑Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface.

❑Use caution when installing or modifying telephone lines.

❑Avoid using the modem during an electrical storm.

❑Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.

❑A socket outlet should be as close as possible to the unit and easily accessible.

!To change the backup battery, please contact your nearest Sony Service Center.

!Caution - The use of optical instruments with this product will increase eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

!For CD-RW/DVD-ROM drive, DVD-ROM drive: Danger - Visible and invisible laser radiation when open. Avoid direct exposure to beam.

!Caution: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

AVERTISSEMENT

3