Connecting the Port Replicator
69
To remove your computer from the port replicator when the power is off
1Turn off your computer and the connected peripherals.
2Pull the levers on each side of the port replicator to disengage the computer
from the port replicator.
3Lift the computer away from the port replicator.
4Close the port replicator connector cover on the bottom of your computer.
Disengaging computer from port replicator
Port replicator connector cover
✍It is extremely important to close the port replicator connector cover after removing
your computer from the port replicator. If the cover is left open, dirt may get inside and
damage the computer.
Lever