Sony PCG-GR Removing a memory module, performing the procedure, 1Shut down your computer, protects the module from ESD, it from electrostatic discharge

Precautions

Sony Notebook User Guide

	n N
	95
￿	Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory
	module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and
	do not handle materials that produce or hold static electricity (cellophane wrappers, for example).
	Ground yourself by maintaining contact with an unpainted metal portion of the chassis while
	performing the procedure.
￿	Do not open the memory module package until you are ready to install the module. The package
	protects the module from ESD.
￿	Use the special bag delivered with the memory module or wrap the module in aluminium foil to protect
	it from electrostatic discharge.

!Do not place the memory module in places subject to:

-Heat sources such as radiators or air ducts,

-Direct sunlight,

-Excessive dust,

-Mechanical vibration or shock,

-Strong magnets or speakers that are not magnetically shielded,

-Ambient temperature of more than +35°C or less than +5°C,

-High humidity.

!Be careful when adding memory. Mistakes on installation or removal of the memory module may cause a malfunction.

Removing a memory module

To remove a memory module, proceed as follows:

1Shut down your computer.

2Disconnect all peripheral devices.

3Unplug the notebook and remove the battery pack(s).

4Wait until the computer cools down.

5Turn your computer upside down.