Connecting a Power Source
21
Connecting a Power Source
You can use either AC power or a rechargeable battery pack as a power source.

Using the AC Adapter

1Plug the cable attached to the AC adapter (PCGA-AC19V1) into the DCIn
connector on the computer.
2Plug one end of the power cord into the AC adapter.
3Plug the other end of the power cord into an AC outlet.
Warning: Only connect 10BASE-T and 100BASE-TX cables to the (Ethernet
network) port. Do not connect any other type of network cable or any telephone line.
Connecting cables other than those listed above may result in an electric current
overload and could cause a malfunction, excessive heat, or fire in the connector.
Toconnect the unit to the network, contact your network administrator.
Bottom
1Battery release lever
2Battery lock lever
3Reset switch