Sony PCV-RX470DS, PCV-RX462DS Push in on the tab A to securely latch the holder to the chassis

48

VAIO Digital Studio™ System Reference Manual

10 Push in on the tab (A) to securely latch the holder to the chassis.

C

E B

D

Drive connectors

Power connectors

Tab

A

Disk drive holder

11

12

13

14

15

Connect the inner drive cable connector (B) to the first drive.

Connect the outer drive cable connector (C) to the second drive.

Connect the first power connector (D) to the first drive.

Connect the second power connector (E) to the second drive.

Replace the side cover (see “Replacing the Side Cover” on page 29).

!For the PCV-RX490TV model, refer to the instructions on the following page to finish installing your new hard drive. Do not complete step 16 of this procedure; it will cause functionality problems to the Giga Pocket card.

16 Reconnect the power cord to the system and then turn on your computer.

All models except the PCV-RX490TV will automatically recognize the new drive and configure itself accordingly when you turn it on. Format and partition the new drive following the instructions provided with the drive.