Sony PCV-RX462DS To install a 3.5-inch internal hard disk drive all models, Disk drive holder

46

VAIO Digital Studio™ System Reference Manual

To install a 3.5-inch internal hard disk drive (all models)

1 Configure the jumpers on the new drive as a slave device (see your drive’s documentation for configuration instructions).

Power connector

Jumpers

Drive connector

2

3

Remove the side cover (see “Removing the Side Cover” on page 28).

Disconnect the drive connector (A in diagram).

A

B

Drive connector

Power supply connector

Tab

C

Disk drive holder

4

5

Disconnect the power connector (B in diagram).

Pull out on the tab (C) that secures the drive holder to the chassis.