Sony PLP-91/D installation instructions I N S T A L L A T I O N I N S T R U C T I O N S, PSB-91/D

I N S T A L L A T I O N I N S T R U C T I O N S

PSB-91/D

PLASMA DISPLAY MOUNTING BRACKET

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480

	Figure 1
(2)	Plasma Bracket	(4)	Mounting Buttons – Tapped
(4)	10-24 x ½ Button Head Cap Screw	(1)	1/8 Allen Key
(4)	M5 x 20mm Phillips Head Cap Screw	(4)	.875 OD x .33 ID x .375 Nylon Spacer
(4) M6 x 20mm Button Head Cap Screw		(1) M4 Allen Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

CAUTION!

WARNING!

PLASMA DISPLAYS ARE EXTREMELY FRAGILE.

ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT IS 125 POUNDS (56.7 KG).

1.Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with chamfered hole of mounting button (larger surface) facing bracket, to bracket (four places) (see Figure 2 & Figure 3).

Figure 2	Figure 3
	Sony Electronics Inc.	8805-000185

1 Sony Drive

Park Ridge, NJ 07656 201-930-1000 www.sony.com/displaysystems