Sony PMW-EX3 Windows, Macintosh, My Computer, created on the desktop, Removing an SxS memory card, NAME” or “Untitled” folder was, With Macintosh, check that a “NO

message (e.g., for formatting or restoration of an SxS memory card) is shown on the screen. It appears when formatting or restoration is completed.

The message is also not displayed while the CLIP INFO screen is shown on the screen. It appears when an operation on the CLIP INFO screen is completed or you return to the thumbnail screen.

2 Select “Execute” by operating the jog dial or the joystick.

The screen displays the following:

				USB Connecting
	3
			With Windows, check that the memory
			card is displayed as a removable disk in
			My Computer.
			With Macintosh, check that a “NO
			NAME” or “Untitled” folder was
			created on the desktop.
			This indicates that the connection is active.
			(The folder name on the desktop of the
			Macintosh computer can be changed as
			needed.)
		Note
	The following operations must be eliminated
	when the access lamp is lit in red.
	• Turning the power off or disconnecting the
Connecting		power cord
	When using the SBAC-US10, refer to the operating
	• Removing the SxS memory card
External	• Disconnecting the USB cable
	Removing an SxS memory card
	instructions of the SBAC-US10.
vDe
	Windows
ices
	1.		Click on the icon of “Safely Remove
			Hardware” on the task bar of the computer.
	2.		Select “Safely remove SxS Memory Card -
			Drive(X:) from the displayed menu.
	3.		Check that the Safe To Remove Hardware
			message appears then remove the card.
134		Operating Clips With a Computer

Macintosh

Drag the SxS memory card icon on the desktop to Trash.

If the SxS memory card icon is located on Finder, click on the eject icon on its side.

Note

Do not select “Card Power Off” from the SxS memory card icon displayed on the menu bar.

Using the XDCAM EX Clip Browsing Software

To copy clips to the local disk of a computer, the XDCAM EX Clip Browsing Software must be used.

Install the XDCAM EX Clip Browsing Software on the supplied CD-ROM to your computer. Although the data regarding recorded materials are stored over multiple files and folders, you can easily handle the clips without considering such data and directory structure by using the XDCAM EX Clip Browsing Software.

Note

If you operate, e.g. copy the clips on the SxS memory card by using the Explorer (Windows) or Finder (Macintosh), the subsidiary data contained by the clips may not be maintained. To avoid such a problem, use the XDCAM EX Clip Browsing Software.

See page 16 for the operating requirements, and refer to the User’s Guide contained in the CD-ROM.

For support information on the XDCAM EX Clip Browsing Software, visit the web sites shown in “XDCAM EX web sites” on page 15 or on the cover page of the supplied CD-ROM.

Using a nonlinear editing system

For a nonlinear editing system, optional editing software that corresponds to the recording formats used with this camcorder is required. Store the clips to be edited on the HDD of your computer in advance, using the supplied XDCAM EX Clip Browsing Software.

Some editing software may not operate properly. Be sure to confirm before use that it conforms to the recording formats used with this camcorder.

To use Final Cut Pro of Apple Inc.

It is necessary to convert the clips to files that can be edited with the Final Cut Pro, using XDCAM Transfer.