Sony PMW-EX3 Rec Review, Recording Shot Marks, Inserting a shot mark during recording, Press the SHOTMARK 1 or 2 button where you wish to insert a mark

Recording Shot Marks Rec Review

When you record shot marks for important scenes as subsidiary data, you can access the marked points easily on a Shot Mark screen, which only displays scenes with shot marks only. This increases editing efficiency.

For the Shot Mark Screen, see “Displaying the SHOT MARK Screen” on page 105.

Recording	The camcorder permits you to record two types of
	shot marks: shot mark 1 and shot mark 2.
	Shot marks can be recorded as needed during
	recording or can be added after recording while
	checking the playback pictures.

Inserting a shot mark during recording

Activate the IR Remote Commander (page 41), and use the SHOTMARK 1 or 2 button.

SHOTMARK 1 button	1	T	PUSH SET
SHOTMARK 2 button	SHOTMARK	ZOOM
	2	W
	THUMBNAIL SUB CLIP
	PREV	PLAY/PAUSE	NEXT	STOP
	.	u	>	x

Press the SHOTMARK 1 or 2 button where you wish to insert a mark.

If the Shot Mark1 or Shot Mark2 function is assigned to an assignable button, you can also use it instead (page 75).

A shot mark of the type corresponding to the button you press is recorded.

For operations to add shot marks after recording, see “Adding shot marks during playback” on page 99 and “Adding/Deleting Shot Marks” on page 106.

74 Recording Shot Marks / Rec Review

You can review the last recorded clip on the screen (Rec Review).

Use the REC REVIEW button on the supplied lens or assign the Rec Review function to an assignable button to use it instead (page 75).

REC REVIEW button

D

C

I

N

M

O

N

O I

T

U O

T

R

S

V

I

D

E

O

After recording is finished, press the REC REVIEW button or the assignable button to which you assigned the Rec Review function.

Playback of the specified block of the clip begins. In Rec Review, the last 3 seconds, 10 seconds, or the entire part of the clip is displayed, depending on the “Rec Review” setting (page 119) of the CAMERA SET menu. It is set to 3 seconds at the factory.

Rec Review is terminated at the end of the clip, resuming STBY (recording standby) status.

Notes

•If the duration of the last recorded clip is less than the time (3 or 10 seconds) specified for Rec Review, the clip is played back from the beginning to the end.

•During Rec Review playback, only the STOP button is valid.

When the STOP button is pressed, Rec Review is canceled, and the camcorder returns to STBY

(recording standby) status.