Sony PMW-EX3 Using the IR Remote Commander, Before use, To activate using the menu, To use the IR Remote Commander, To activate using an assignable button

	HDV	SDI
		OUT
TCI	GEN
	LOC
N	KIN
RE
MOTE
TC
OUT

DC I	MO	NITOR
N			S
	OUT
			VIDEO

	CH-2	COM
-1	IO OUT
CH AUD

Accessory screw holes

11 2

DC output cable clamp

1 Insert the cable clamp to the frame so that the rear projection of the cable clamp fits in the slot on the frame. Adjust the position of the clamp by sliding it so that the screw hole of the clamp aligns with that of the frame.

2 Secure the clamp, using the supplied screw.

Using the IR Remote Commander

Before use

Before you use the supplied IR Remote Commander for the first time, pull out the insulation sheet from the battery holder.

Insulation sheet

A CR2025 lithium battery is set in the holder at the factory.

To use the IR Remote Commander

For controlling the camcorder from the IR Remote Commander, activate the remote control function of the camcorder after turning the power on.

Activating/deactivating the remote control function can be achieved using the Setup menu or an assignable button.

To activate using the menu

Press the MENU button to set the camcorder to

Menu mode, select (the OTHERS menu) and set “IR Remote” to “On.”

OTHERS

		Clock Set	B
		Language	: Eng l i sh
		Assign Bu t t on B
		Ta l l y	B
	Hours Meter		B
00:00
		IR Remote	: On

Bat te r y Alarm B O f f

For details on menu operations, see “Basic Menu Operations” on page 114.

To activate using an assignable button

Assigning “IR Remote” to one of the assignable buttons permits you to activate/deactivate the remote control function by pressing the button.

For the assignable buttons, see“Changing Functions of the Assignable Buttons” on page 75.

Preparations

Using the IR Remote Commander 41