Freeze Mix: Image Alignment 69
Recording
Using the Freeze Mix function, an image (still
picture) of a clip recorded in HD mode can be
temporarily superimposed on the current camera
picture, permitting you to easily align images for
next recording.

To use the Freeze Mix function

Assign the Freeze Mix function to one of the
assignable buttons.
For details, see “Changing Functions of the
Assignable Buttons” on page 61.

Superimposing a Freeze Mix image

1Stop recording to set the camcorder to
STBY (recording standby) status.
2Press the REC REVIEW button to
review the recorded images, or press the
ASSIGN button to which you assigned
“Freeze Mix.”
3Press the ASSIGN button to which you
assigned “Freeze Mix” at the image
with which you want align.
The image where you pressed the ASSIGN button
in step 3 is displayed as a still picture over the
current camera picture.

Canceling Freeze Mix status

You can cancel it with the ASSIGN button to
which you assigned “Freeze Mix” or the REC
START/STOP button on the handle or the grip.
• When you cancel Freeze Mix status by pre ssing
the ASSIGN button, the normal camera picture
is restored.
• When you cancel Freeze Mix status by pre ssing
the REC START/STOP button on the handle or
the grip, normal recording begins.
Notes
• The Freeze Mix function cannot be used in SD
mode.
• The Freeze Mix function cannot be used if the
recording video format is SP 1440/23.98P.
• If the recorded picture and the current camera
picture differ in video format, the Freeze Mix
display cannot be achieved.
• The Freeze Mix display cannot be obtained in
Slow & Quick Motion mode or Slow Shutter
mode.
• You cannot operate the Setup menus and
P.PROFILE menu in Freeze Mix status.
Freeze Mix: Image Alignment