02Preparation

Preparing the PSP® system for use

Charging the battery

1 Insert the battery pack.

Before using the PSP® system for the first time after purchase, you must follow these steps to charge the battery.

Caution

•The socket-outlet shall be installed near the equipment and shall be easily accessible.

•Do not plug the AC power cord for the PSP® system into an electrical outlet until you have made all other connections.

Notices

•Do not use the PSP® system with the AC adaptor when the battery pack is not inserted in the system. If the AC adaptor is disconnected suddenly, it may result in damage to the system.

•Before inserting the battery pack, find the serial and model numbers listed within the battery compartment and make a record of the numbers for future reference.

While holding down the push button, slide the battery cover in the direction of the arrow. Align the bottom surface of the battery pack with the system to attach the battery.

1

PUSH

P

2

Align the tabs, and then slide the cover in the direction of the arrow until it locks firmly into place.

4 PUSH

3

6