Adjusting the Recording

Level

Adjusting the recording level for digital recording

You can adjust the recording level using the Setup Menu. (For details of “Using the Setup Menu,” see page 28.)

When using the remote, set SELECT to CDR.

MENU/NO

6 While monitoring the sound, turn AMS (or press ./> on the remote) to adjust the recording level, then press AMS (or YES).

Adjust the recording level within a range of

–∞ to +18 dB, so that the OVER indication of the peak level meters does not light up in red.

OVER indication

OVER

TOC

DECK B

CD TEXT CD - RW

Recording/Editing

AMS REC LEVEL

SELECT

MENU/NO YES

./>

1 Do Steps 1 to 4 of “Recording on a CD- R or CD-RW Manually” on page 20.

2 Play the portion of the sound source with the strongest signal level.

3 Press MENU/NO.

4 Turn AMS (or press ./> on the remote) to select the program source.

To select

Display

DECK A

DECK A Lvl

 

 

a component connected to

Optical Lvl

the DIGITAL OPTICAL

 

IN jack

 

 

 

5 Press AMS (or YES).

7 Press MENU/NO.

8 Stop playing the sound source.

9 To start recording, do Steps 6 and 7 of “Recording on a CD-R or CD-RW Manually” on page 20.

Note

You cannot change the setting of the DIGITAL OPTICAL output level even if you adjust the recording level for digital recording.

Adjusting the recording level for analog recording

Turn the REC LEVEL control on the front panel. Adjust the recording level so that the OVER indication on the peak level meters does not light up.

Note

You can adjust the recording level while recording, not while playing a disc in DECK B.

21