Self-diagnosis Function
When the
| Message | Explanation |
| C12/ | You are trying to record a disc that |
| Cannot Copy | cannot be played back in |
|
| or with an external device, such as |
|
| |
|
| • Remove the disc, and then insert a |
|
| music CD for playback. |
|
|
|
| C13/ | Recording has not been completed |
| Rec Error | successfully because of vibration. |
|
| • Relocate the unit in a place free of |
|
| vibration and restart the recording |
|
| again. |
|
|
|
|
| The disc you try to record is |
|
| excessively dirty (such as oil- |
|
| stained or finger marked) or |
|
| scratched. Or the disc is not |
|
| normal. |
|
| • Replace the disc with another one |
|
| and restart the recording again. |
|
|
|
| C14/ | The unit did not read the TOC |
| TOC Error | information. |
|
| • Insert other discs. |
|
|
|
| C41/ | The sound source you are trying to |
| Cannot Copy | record is a copy of a commercial |
|
| music software. Or you are trying |
|
| to record on a |
|
| digitally. |
|
| • Because of the restriction of the |
|
| Serial Copy Management System, |
|
| you cannot record a copy of a |
|
| commercial music software. |
|
| Neither can you record a |
|
| |
|
| • Use analog recording through the |
|
| ANALOG IN jack when you |
|
| record from other units. Or use |
|
| |
|
| record from DECK A. (The |
|
| recording mode is automatically |
|
| changed to analog recording.) |
|
|
|
| C71/ | If this message is displayed |
| Din Unlock | momentarily, this is not an error. It |
|
| is caused by the digital signal |
|
| during recording. |
|
|
|
|
| During recording of a digital sound |
|
| source, the connecting cable has |
|
| been disconnected or the player of |
|
| the sound source has turned off. |
30 |
| • Connect the cable or turn on the |
| digital player. | |
|
| |
|
|
System Limitations
“TOC Reading” appears in the display for a long time
Regardless of the disc, “TOC Reading” appears in the display of DECK B longer than in that of DECK A. This is because, DECK B is a
Limitations when recording over an existing track
•The correct remaining recording time may not be displayed.
•The remaining recording time may be inaccurately displayed relative to the total recorded time.
•You can record up to 99 tracks.
Note
When you turn on the unit, you will hear some mechanical noise from the unit. This is not a malfunction.