Specifications
DECK A (the CD player section)
System | Compact disc digital audio |
| system |
Laser | Semiconductor laser |
| (λ = 780 nm) |
| Emission duration: |
| continuous |
Playable discs | CD, |
Frequency response | 20 Hz – 20,000 Hz |
| (±0.5 dB) |
Signal to Noise Ratio | Over 100 dB during play |
Wow and flutter | Below measurable limit |
DECK B (the | |
recording section) |
|
System | Compact disc digital audio |
| system |
Laser | Semiconductor laser |
| (λ = 780 nm) |
| Emission duration: |
| continuous |
Playable discs | CD, |
Recordable discs | |
| Audio) |
Frequency response | 20 Hz - 20,000 Hz |
| (±0.5 dB) |
Signal to Noise Ratio | Over 100 dB during play |
Wow and flutter | Below measurable limit |
Inputs |
|
ANALOG IN | Impedance: 47 kilohms |
(Phono jacks) | Rated input: 500 mVrms |
| Minimum input: |
| 250 mVrms |
DIGITAL OPTICAL IN (Square optical connector jack)
Optical wavelength: 660 nm
DIGITAL COAXIAL IN
(Phono jack)Impedance: 75 ohms Rated output: 0.5
Outputs
ANALOG OUT 1, OUT 2 Rated output: 2 Vrms
(Phono jacks) | Load impedance: over |
| 10 kilohms |
DIGITAL OPTICAL OUT 1, OUT 2 (Square optical connector jack)
| Wavelength: 660 nm |
| Rated output: |
DIGITAL COAXIAL OUT 1, OUT 2 | |
(Phono jacks) | Rated output: 0.5 |
| ±20 % |
| Load impedance: 75 ohms |
PHONES | Load impedance: 32 ohms |
(Stereo phone jack) | Rated output: 28mW |
General
Power requirements | 120 V AC, 60 Hz |
Power consumption | 28 W |
Dimensions (approx.) (w/h/d) incl. projecting parts
and control | 430 ⋅ | 110 ⋅ | 400 mm |
| (17 ⋅ | 4 3/8 ⋅ | 15 3/4 inch) |
Mass (approx.) | 7.9 kg |
| |
| (17 lbs 7 oz) |
| |
Supplied accessories | See page 6. |
|
Design and specifications are subject to change without notice.
Information Additional
41