Tip
To specify a desired playback order, before the folder or file name, input the order by number (e.g., “01”, “02”), then record contents onto a disc. (The order differs depending on the writing software.)
Note on playback of MP3 files
Depending on the encoding/writing software, recording device, or the recording media used at the time an MP3 file is recorded, you may encounter such problems as disabled playback, sound interruptions, and noise.
Playing a disc with MP3 files (DECK A only)
This system lets you play discs with MP3 files. When using the remote, set DECK A/DECK B to DECK A.
POWER DISC
Nx ALBUM AMS X PLAY MODE
DECK A/DECK B
PLAY MODE
H
X x
./>
ALBUM +/–
1 Turn on your amplifier and adjust the volume to the minimum.
2 Set your amplifier’s input selector to select this unit.
4 Press one of the DISC | Basic | |
3 Press POWER. | Operations | |
and place a disc with MP3 files. Press | ||
| ||
A again to close the disc tray. |
|
With the label side up
5 Press PLAY MODE repeatedly to select the Continuous play mode.
When you | The unit plays |
select |
|
|
|
ALL DISCS | All discs in the unit consecutively |
| in the order of the disc number. |
|
|
1 DISC | Only one disc you have selected. |
|
|
ALBUM* | All MP3 files in the selected album |
| on the selected disc. |
|
|
*When a disc that contains no album is played with “ALBUM” selected, the disc is played in the same way as 1 DISC mode.
6 To select an album, press ALBUM until
the ALBUM SELECT indicator in the display lights up, then turn AMS until the album you want appears (or press ALBUM +/– on the remote).
7 Press N (or H on the remote).
The unit starts playing. Adjust the volume on the amplifier.
continued
11