CD - RW
CD TEXT
TRACK
DECK B
DISC
DECK A
TOC REC
DISC
ALBUM
TRACK
Press YES.
A flashing cursor appears.
5
Letter/number/ symbol buttons
CLEAR
x
./>
m/M
1 Place a CD-R or CD-RW disc that has not been finalized in DECK B.
2 Press NAME EDIT/SELECT while the unit is stopped.
“Name In?” appears in the display.
3 Press YES.
4 Press ./> to select the disc or track you want to label.
When you label the disc name, select “Disc,” and when you label the track name, select the track number.
MENU/NO
YES
DECK A/DECK B
NAME EDIT/ SELECT
Labeling Tracks/Discs Z
You can create titles for tracks/discs for a recorded CD-R or CD-RW with capital and small letters, numbers, and symbols. You can enter a disc name of up to 70 characters, and a track name of up to 70 characters per track, for 40 tracks per disc.
Label the track/disc before finalizing it. You cannot label the track/disc on a finalized disc.
After labeling, you must finalize the disc before you remove the disc or turn off the unit. Otherwise, the titles will be cleared.
When using the remote, set DECK A/DECK B to DECK B.

6 Press NAME EDIT/SELECT repeatedly to select the character type as follows:

 

 

DISC

DECK A

 

ALBUM

TOC

TRACK

 

DECK B

 

DISC

 

TRACK

CD TEXT

CD - RW

 

To select

Display

Capital letters and symbols*

Selected AB

Small letters and symbols*

Selected ab

Numbers

Selected 12

*You can use the following symbols in titles: ’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ * ` To enter a space, press 10/0.

7 Press a letter/number/symbol button to enter a character.

DISC

DECK AALBUM

TRACK

TOC

DECK B

 

DISC

 

TRACK

CD TEXT

CD - RW

 

To enter a number, press the number button you want.

To enter a letter or symbol,

1Press the corresponding letter button repeatedly until the letter or symbol you want flashes. You can also enter a letter or symbol by pressing ./> repeatedly. To select the symbol, press > repeatedly after flashing “’”.

2Press M.

8 Repeat steps 6 and 7 until you have entered the entire title.

If you enter an incorrect character, press

mor M until the incorrect character starts flashing.

Press CLEAR to erase the incorrect character, then enter the correct one.

9 Press YES.

“Complete !” appears in the display for a few seconds and the track or disc is labeled. Finalize the disc before you remove the disc or turn off the unit. Otherwise, the titles will be cleared.

To cancel labeling

Press MENU/NO or x.

continued

Recording/Editing

33