“Complete !” appears in the display for a few seconds and the track or disc is labeled.
Press YES.
Do Steps 6 to 8 of “Labeling Tracks/ Discs” (page 26) to enter the new title.
2 Press and hold CLEAR until the current title is erased.
3
4
Changing an existing title
1 Do Steps 1 to 5 in “Labeling Tracks/ Discs” (page 26) to select the title you want to change.

6 Press NAME EDIT/SELECT repeatedly to select the character type as follows:

TOC

DECK B

CD TEXT CD - RW

To select

Display

Capital letters and symbols*

Selected AB

 

 

Small letters and symbols*

Selected ab

 

 

Numbers

Selected 12

 

 

*You can use the following symbols in titles:

’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ ` To enter a space, press 10/0.

7 Press a letter/number/symbol button to enter a character.

TOC

DECK B

CD TEXT CD - RW

To enter a number, press the number button you want.

To enter a letter or symbol,

1Press the corresponding letter button repeatedly until the letter or symbol you want flashes. You can also enter a letter or symbol by pressing ./> repeatedly. To select the symbol, press >repeatedly after flashing “’.”

2Press M.

8 Repeat Steps 6 and 7 until you have entered the entire title.

If you enter an incorrect character, press

mor Muntil the incorrect character starts flashing.

Press CLEAR to erase the incorrect character, then enter the correct one.

9 Press YES.

“Complete !” appears in the display for a few seconds and the track or disc is labeled. Finalize the disc before you remove the disc or turn off the unit. Otherwise, the titles will be cleared.

To cancel labeling

Press MENU/NO or x.

Recording/Editing

27