Press POWER.

1

2 Press OPEN/CLOSE of DECK B and place a recordable CD-R or CD-RW on the disc tray. Press OPEN/CLOSE of DECK B again to close the disc tray.

With the label side up

“TOC Reading” appears. The unit starts to read the TOC (Table of Contents) data and shows the type of the disc on the deck in the display.

3 Press one of the DISC 1-5 A buttons of DECK A and place a CD on the disc tray. Press A of DECK A again to close the disc tray.

When you perform Normal Synchro- Recording (NORM SYNC), you can choose the disc which you want to record, and the play mode.

When you perform Make-Disc Synchro- Recording (MAKE DISC), the disc in DECK A is used to record.

4 Press CD SYNCHRO NORMAL repeatedly to select the recording type, “NORM SYNC” or “MAKE DISC.”

DECK B stands by for recording, and DECK A stands by for playing.*

When you place a CD-R or CD-RW in the deck, the unit optimizes itself for the best possible recording and “OPC” appears on the display shortly.

When “Not Blank” appears, make sure that the blank disc is placed correctly.

*The unit stands by for recording immediately by pressing YES. While “OPC” appears, you cannot press YES.

5 After “New Track” appears in the display, press N(or H on the remote) (or X) of DECK B to start recording.

Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.

To stop recording

Press x.

High-Speed Synchro-Recording

You can easily make digital recordings from a CD to a CD-R or CD-RW, faster than normal speed Synchro-Recording.

You cannot monitor the recorded signal while recording.

When using the remote, set SELECT to CDR.

CD SYNCHRO HIGH N x

SELECT

CD SYNCHRO

HIGH

H

x

1 Do Steps 1 to 3 of “Normal speed Synchro-Recording” on page 18.

2 Press CD SYNCHRO HIGH repeatedly to select the recording type, “NORM SYNC” or “MAKE DISC.”

DECK B stands by for recording, and DECK A stands by for playing. *

*The unit stands by for recording immediately by pressing YES.

3 After “New Track” appears in the display, press N(or H on the remote) (or X) of DECK B to start recording.

High-Speed Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.

To stop recording

Press x.

Playing from the beginning of the disc after recording

1 Press x again while the unit is stopped.

2 Press N (or H on the remote).

The unit starts playing from the first track.

Note

When you make Synchro-Recording in programmed order, the recording speed automatically changes to Normal.

Recording/Editing

19