41
Recording to the HDD (“GUIDE Plus+”)
Setting the Timer Manually (Schedule)
You can set the timer for a total of 32
programmes using the GUIDE Plus+ system
and the Timer List (page 50), up to 30 days
in advance.
Before you start recording…
• Check that the HDD has enough available
space for the recording (page82). You can
open up disc space by erasing titles
(page67) .
b
The recording destination is HDD only.
1Press TIMER.
The schedule list appears.
2Press the green button (“Manual”).
3Set the blue-highlighted date using
the number buttons and </M/m/,.
Then press the green button
(“Next”).
4Set the start time using the number
buttons and </M/m/,. Then press
the green button (“Next”).
5Set the stop time using the number
buttons and </M/m/,. Then press
the green button (“Next”).
6Confirm the input source and press
,, then select the programme
position using the number buttons or
M/m.
7Press the green button (“Next”).
The display for entering characters
appears. You can change the title name,
if necessary.
8Press the green button (“Save”).
The date, start and stop times,
programme position, etc. settings
appear.
9Press the green button (“Frequency”)
repeatedly to set the recording
frequency.
10
Press , to display “Timing,” then
press the yellow button (“Timing”)
repeatedly to adjust the recording
start/end time.
When “Timing” is set to “<5/20>,” the
recording starts 5 minutes before the
scheduled recording start time, and ends
20 minutes after the scheduled recording
end time.
11
Press GUIDE to exit the GUIDE Plus+
system.
The recorder is ready to start recording.
• To modify the timer setting, see page
42.
To stop recording during timer recording
Press xREC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
b
The title name may be displayed differently in the
Title List from the one displayed when you set the
timer.
HDD
Date
,continued