67
Erasing and Editing
1Press TITLE LIST.
2Select the title you want to erase
using M/m.
To erase the selected title only, go to
step 5.
3Press MARKER.
A check mark appears next to the
selected title.
• To clear the check mark, press
MARKER again.
4Repeat steps 2 and 3 to select all of
the titles you want to erase.
5Press the red button (“Edit”) to select
“Erase,” and press .
The display asks for confirmation.
6Select “Yes,” and press .
The selected titles are erased.
b
Titles on DVD+RWs/DVD+Rs or DVD-RWs/
DVD-Rs (Video mode) cannot be erased.
You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.
1Press TITLE LIST.
2Select the title you want to partially
erase using M/m.
3Press the red button (“Edit”) to select
“A-B Erase,” and press .
The “A-B Erase” display appears.
4Press N to start playback.
5Select point A using m/M, etc.,
and press (“Start”).
The start point (point A) is set.
6Select point B, and press (“End”).
The end point (point B) is set.
• To reset either point A or B, select
“Start” or “End” using </,, and
repeat from step 5 or 6.
7Select “Erase,” and press .
The display asks for confirmation.
8Select “Yes,” and press .
The scene is erased.
9Select “Finish,” and press to exit.
To cancel “A-B Erase”
Press ORETURN. The Title List appears.
b
• Images or sound may be momentarily
interrupted at the point where you erase a section
of a title.
• Sections shorter than about 3 se conds may not be
erased.

Erasing a title (Erase)

Erasing a section of a title

(A-B Erase)

HDD
-
RVR
-
RWVR
HDD
,continued