AConnecting to audio L/R input jacks

This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio cord (supplied).

White

White

(L)

(L)

Red

Red

(R)

(R)

• Surround effect (page 49)

or

Note

Do not connect the LINE 4 IN (AUDIO L/R) and LINE 2 OUT (AUDIO L/R) jacks to your TV’s audio output jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

BConnecting to a digital audio input jack

If your AV amplifier (receiver) has a Dolby*1 Digital, DTS*2, or MPEG audio decoder and a digital input jack, use this connection.

Connect using a coaxial or optical digital cord (not supplied).

Coaxial cord

Optical cord

• Surround effect

Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio (5.1ch)

*1 Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

*2 “DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems, Inc.

Notes

•After you have completed connection B, make the appropriate settings under [Audio] Setup (page 75). If your AV amplifier (receiver) has an MPEG audio decoder function, set [MPEG] to [Bitstream] in [Audio] Setup (page 75). Otherwise, no sound or a loud noise will come from your speakers.

•The surround sound effects of this recorder cannot be used with connection B.

Settings and Hookups

17