Controlling the volume of your AV amplifier (receiver) with the remote

 

 

 

 

TV/DVD

 

 

 

 

switch

 

 

 

 

"/1

 

1

2

3

 

Number

4

5

6

 

buttons

7

8

9

2 +/–

 

 

 

 

 

 

0

 

 

If you have a Sony DVD player or more than one Sony DVD recorder

If the supplied remote interferes with your other Sony DVD recorder or player, set the command mode number for this recorder and the supplied remote to one that differs from the other Sony DVD recorder or player.

The default command mode setting for this recorder and the supplied remote is “MODE3.”

x

1 Slide the TV/DVD switch to DVD.

2 Hold down [/1, and enter the manufacturer code (see the table below) for your AV amplifier (receiver) using the number buttons.

3 Release [/1.

The 2 (volume) +/– buttons control the AV amplifier’s volume.

If you want to control the TV’s volume, slide the TV/DVD switch to TV.

zHint

If you want to control the TV’s volume even when the TV/DVD switch is set to DVD, repeat the steps above and enter the code number 90 (default).

Code numbers of controllable AV amplifiers (receivers)

If more than one code number is listed, try entering them one at a time until you find the one that works with your AV amplifier (receiver).

Manufacturer

Code number

 

 

Sony

78, 79, 80, 91

 

 

Denon

84, 85, 86

 

 

Kenwood

92, 93

 

 

Onkyo

81, 82, 83

 

 

Pioneer

99

 

 

Sansui

87

 

 

Technics

97, 98

 

 

Yamaha

94, 95, 96

 

 

./>

COMMAND

MODE switch

1 Turn off the recorder.

2 Press down x (stop) on the recorder until “MODE” appears in the front panel display.

3 While keeping x (stop) pressed, repeatedly press ./> on the recorder to select the command mode (MODE1, 2, or 3).

Front panel display

4 Slide the COMMAND MODE switch on the remote so it matches the mode you selected above.

20