,There is not enough disc space for the recording.

,A separate recording was in the process of being made without the use of the timer (page 47).

,The recorder was in the process of DV/ Digital8 Dubbing.

Recording does not stop immediately after you press x REC STOP.

,It will take a few seconds for the recorder to input disc data before recording can stop.

Recording does not stop after you press

xSTOP.

,Press x REC STOP.

Timer recording is not complete or did not start from the beginning.

,There was a power failure during recording. If the power recovers when there is a timer recording, the recorder resumes recording. Should the power failure continue for more than 1 hour, reset the clock (page 72).

,Disc space was not enough.

,The recorder is connected to the TV output jack of the connected equipment.

Synchro-Recording does not complete.

,The timer setting for the connected equipment overlapped the recorder’s timer setting (page 48).

,There was a power failure during the recording.

The recorder automatically starts recording when the satellite receiver is turned on.

,The Synchro-Rec function was activated. Turn off the satellite receiver and cancel the Synchro-Rec function (page 47).

DisplayThe clock has stopped.

,Set the clock again (page 72).

,The clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 72).

Contents previously recorded were erased.

,Data that is not playable on this recorder but was recorded on a DVD with a PC will be erased from the disc when the disc is inserted.

Recording from the equipment with a timer

Nothing was recorded even though you set the Synchro-Rec setting correctly.

,You forgot to turn off the connected equipment. Turn off the connected equipment and set the recorder to Synchro- Rec standby mode (page 47).

,The recorder was not set to the Synchro- Recording standby mode. Press

c z SYNCHRO REC to have the recorder stand by for recording. Make sure the SYNCHRO REC indicator lights up on the front panel (page 47).

,The equipment is not connected to the LINE 1 IN jacks of the recorder.

The TIMER REC indicator is flashing.

,The disc does not have enough space.

,Insert a recordable disc inside the recorder.

,The inserted DVD is protected (page 35).

The recording mode indication is incorrect.

,When the recording or dubbing is less than ten minutes, or if a picture with little movement is displayed for more than ten minutes, the recording mode indication may be displayed incorrectly. Note that the actual recording or dubbing itself was correctly made in the selected recording mode.

,After playing titles recorded in EP and SLP mode, the recording mode indication may change depending on the recorded program.

The clock does not appear in the front panel display when the recorder is turned off.

,“Power Save Standby” in the “Others” setup is set to “On” (page 81), and the recorder is in standby mode.

86