Programme listings for some programme positions are missing.

,The programme guide data may not be updated. Turn off the recorder and let the recorder receive the progrmme guide data.

,Some broadcast stations support only two days of data. For details, see the following website: www.europe.guideplus.com

,All of the GUIDE Plus+ data could not be received because the reception is poor.

The programme listing is not up to date.

,The recorder was in use during the time that the GUIDE Plus+ data was scheduled to be downloaded.

,All of the GUIDE Plus+ data could not be received because the reception is poor.

Sound

There is no sound.

,Re-connect all connections securely.

,The connecting cord is damaged.

,The input source setting on the amplifier or the connection to the amplifier is incorrect.

,The recorder is in reverse play, fast- forward, slow motion, or pause mode.

,If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the “Audio Connection” settings in the “Audio” setup (page 100).

Sound distortion occurs.

,Set “Audio ATT” in the “Audio” setup to “On” (page 100).

Sound is noisy.

,When playing a CD with DTS sound tracks, noise will come from the LINE 2 OUT R- AUDIO-L jacks, LINE 1 – TV jack, or LINE 3/DECODER jack (page 67).

The sound volume is low.

,The sound volume is low on some DVDs. The sound volume may improve if you set “Audio DRC” in the “Audio” setup to “TV Mode” (page 101).

,Set “Audio ATT” in the “Audio” setup to “Off” (page 100).

An alternate audio track cannot be recorded or played.

,When recording from connected equipment, set “Line Audio Input” in OPTIONS menu to “Bilingual” (page 63).

,Multilingual tracks (main and sub) cannot be recorded on DVD+RWs, DVD-RWs (Video mode), DVD+Rs, or DVD-Rs (Video mode). To record the language, set “Bilingual Recording” of the “DVD Rec. Settings” in the “Recording” setup to “Main” or “Sub” before recording

(page 102). To record both the main and sub sounds, record on DVD-RWs/DVD-Rs (VR mode).

,Any discs other than the HDD or DVD- RWs/DVD-Rs (VR mode) cannot be used for recording both main and sub sounds. To record on the HDD, set “Bilingual Recording” of the “HDD Rec. Settings” in the “Recording” setup to “Main+Sub” (page 102).

,If you have connected an AV amplifier to the DIGITAL OUT (COAXIAL) jack and want to change the audio track for HDD/ DVD-RWs/DVD-Rs (VR mode) during playback, set “Dolby Digital” of the “Audio Connection” in the “Audio” setup to “D- PCM” (page 100).

Playback

The recorder does not play any type of disc (except HDD).

,The disc is upside down. Insert the disc with the labelled side facing up.

,The disc is not correctly inserted.

,Moisture has condensed inside the recorder. In this case, if the recorder is on, leave it on (if it is off, leave it off) for about an hour until the moisture evaporates.

,If the disc was recorded on another recorder and was not finalised (page 40), the recorder cannot play the disc.

The recorder does not start playback from the beginning.

,Resume play was activated (page 65).

,You have inserted a DVD whose Title menu or DVD menu automatically appears on the TV screen when it is first inserted. Use the menu to start playback.

Information Additional

,continued 109