3Press ENTER if point A is correct.

If point A is incorrect, select point A using c/C, and press ENTER. The display for setting point B appears.

4Select point B using m/M, and press ENTER.

Playback pauses.

5Press ENTER if point B is correct.

If point B is incorrect, select point B using c/C, and press ENTER. The display asks for confirmation.

•To reset point A, press M and O RETURN, and go to step 2.

•To reset point B, press M and repeat step 4.

•To preview the title without scenes to be erased, select “Preview” (except for DVD+RWs).

6Select “OK,” and press ENTER.

The scene is erased. The display for setting point A appears.

•To continue, go to step 2.

•To finish, select “Quit.”

zHint

A chapter mark is inserted after the scene was erased. The chapter mark divides the title into separate chapters on either side of the mark.

bNotes

•Images or sound may be momentarily interrupted at the point where you erase a section of a title.

•Sections shorter than five seconds may not be erased.

•For DVD+RWs, the erased section may be slightly different from the points you selected.

Dividing a title (Divide)

HDD -RWVR * -RVR *

If you want to dub a long title to a disc but do not want to reduce the picture quality, divide the title into two shorter titles. Note that dividing a title cannot be undone.

*Only playlist titles can be divided for DVD-RWs/ DVD-Rs (VR mode).

1Press TITLE LIST.

Press </, to switch the Title Lists, if necessary.

2Select a title, and press ENTER.

The sub-menu appears.

3Select “Divide,” and press ENTER.

The display for setting the dividing point appears, and the title starts to play.

•To return to the beginning of the title, press X and then press ..

4Select the dividing point by pressing m/M, and press ENTER.

Playback pauses.

5Press ENTER if the dividing point is correct.

If the dividing point is incorrect, select the dividing point using c/C, and press ENTER. The display asks for confirmation.

• To change the dividing point, press M.

6Select “OK,” and press ENTER.

The title is divided in two.

zHint

After a title is divided, the title name prior to division is assigned to both the first and second parts.

Editing and Erasing

,continued 77