Dubbing

HDD +RW -RWVR-RWVideo+R

-RVR-RVideo

Dubbing a single title (Title Dubbing)

1Insert the DVD that you are going to dub to or from.

2Press HDD or DVD to select the source.

3Press TITLE LIST.

Press </, to switch the Title Lists, if necessary.

4Select a title, and press ENTER.

The sub-menu appears.

5Select “Dubbing,” and press ENTER.

The display for selecting the dubbing mode appears.

If a title with (page 84) is selected in the title list, a confirmation display is displayed.

To “Move,” select “OK.”

ASize of the title (approximate)

This is displayed in red when the size exceeds the available space on the dubbing target media.

BDirection of dubbing

CAvailable space on the disc to be dubbed (approximate)

DInformation about the title to be dubbed

EDubbing mode and the space that remains after dubbing (approximate)

6Select “Dub Mode.”

7Select a dubbing mode using M/m.

Fast*

*From the HDD to a DVD only. Appears when High-speed Dubbing is available for the title (page 82).

8Select “Start,” and press ENTER.

The remaining time of dubbing appears in the front panel display.

To automatically adjust the dubbing mode

If there is not enough available space on the target disc, the recorder automatically selects a dubbing mode with lower picture quality according to the available space. If there is insufficient disc space in the selected dubbing mode, the following display appears after step 8.

Select “OK” and go to step 8.

To manually select another dubbing mode, select “Cancel,” and go to step 7.

To stop dubbing

Press OPTIONS to select “Stop Dubbing,” and press ENTER. When asked for confirmation, select “OK,” and press

ENTER.

When dubbing (Move) is stopped partway, no part of the title will be moved to the dubbing target. However, note that this will decrease the free disc space for DVD+Rs/ DVD-Rs.

zHint

You can turn off the recorder during dubbing. The recorder completes dubbing even after being turned off.

DVD) y (HDD Dubbing

,continued 85