“Info”: Shows information when available.

“Editor”: Allows you to edit the channel lineup and channel display (page 49).

“Setup”: Allows you to change the language, country/region, postal code, input source, or host channel.

E“Home” position: When you press the blue button (“Home”), the cursor returns to the last programme position on the “Grid.”

FTiles: Shows the programme titles and category; green (sports), purple (movies), blue (children’s), teal (others).

GBroadcast station Logo: Shows the broadcast station logo.

HTime Slot: Indicates the currently selected time slot. Use </, to select a different time slot.

zHint

You can also move the cursor to the Menu Bar by pressing MENU.

Troubleshooting guide

If you are having trouble displaying the television programme list, please check the following:

•The clock must be set correctly. If the clock is not set, set it manually (page 109).

•This recorder downloads the GUIDE Plus+ data several times a day when the recorder is turned off (standby mode). Turn off the recorder when you are not using it (for example, at night). After initial setup (page 23), it may take up to 24 hours for your recorder to start receiving programme listings. It may take up to one day to receive all seven days of TV programme listings.

•Check the following if the programme guide data has not been received after waiting for a day:

–“Easy Setup” (page 23) is completed.

–The host channel is not disabled (see “Disabling programme positions” on page 50).

–The timer is not set.

If the programme guide data still cannot be received after checking the above, search for the host channel at the following website and set the host channel manually (page 49): www.europe.guideplus.com

•If the host channel has changed or moved, the programme guide data cannot be received. In this case, follow the steps in “Searching for the GUIDE Plus+ host channel” (page 48) to update the host channel setting.

•If the set top box receiver is connected to the recorder using a SCART cord only, do the following:

–Turn on your set top box receiver.

–Connect the set top box controller.

–Follow the steps in “Changing the GUIDE Plus+ host channel manually” (page 49) to set the host channel manually. Be sure to set your set top box receiver (tuner) as the source.

bNotes

•Your set top box receiver’s programme position may suddenly change even if the recorder is turned off. This is because the set top box controller has changed the programme position to receive the GUIDE Plus+ data.

•When you reset the recorder (page 135) the following GUIDE Plus+ system settings are reset:

–Country/region setting in “Easy Setup”

–“Country” of “Setup” - “Basic Setup” in the Menu Bar

–“Postal Code” of “Setup” - “Basic Setup” in the

Menu Bar

Note that the GUIDE Plus+ system is also reset when you make changes to the host channel settings.

•The GUIDE Plus+ system cannot be used when “Input Line System” is set to “NTSC” in the “Basic” setup (page 110).

44