bNotes

•Angles and subtitles cannot be changed with titles recorded on this recorder.

•Slideshows made with a DVD camcorder can only be played. Other play functions, such as fast forward, cannot be used.

Notes on playing DTS sound tracks on a

CD

•When playing DTS-encoded CDs, excessive noise will be heard from the analogue stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analogue stereo jacks of the recorder are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external DTS decoder must be connected to the DIGITAL OUT jack of the recorder.

•Set the sound to “Stereo” using the AUDIO button when you play DTS sound tracks on a CD (page 54).

Notes on playing DVDs with a DTS sound track

DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack.

When you play a DVD with DTS sound tracks, set “DTS” to “On” in the “Audio” setup (page 90).

Adjusting the picture quality

HDD +RW -RWVR-RWVideo +R

-RVR-RVideoDVD VCD

1 Press OPTIONS during playback to select “Video Settings,” and press

ENTER.

2 Select an item, and press ENTER.

The adjustment display appears. “FNR” (frame noise reduction): Reduces noise contained in the luminance element of the video signal. “BNR” (block noise reduction): Reduces “block noise” or mosaic like patterns in the picture.

“MNR” (mosquito noise reduction): Reduces the faint noise appearing around the outlines of the images. The noise reduction effects are automatically adjusted within each setting range according to the video bit rate and other factors.

“Sharpness”:

Sharpens the outlines of the images. “PB Video Equalizer” (Playback video equalizer):

Adjusts the picture in greater detail. Select an item and press ENTER.

•Contrast: changes the contrast.

•Brightness: changes the overall brightness.

•Colour: makes the colours deeper or lighter.

•Hue: changes the colour balance.

3 Press </, to adjust the setting, and press ENTER.

The default settings are underlined.

“FNR”: (weak) Off

1

2

3 (strong)

“BNR”: (weak) Off

1

2

3 (strong)

“MNR”: (weak) Off

1

2

3 (strong)

“Sharpness”*: (weak) Off

1

2 3

(strong)

 

 

 

“PB Video Equalizer”:

 

 

• Contrast: (weak) –3

~ 0 ~

3 (strong)

• Brightness: (dark) –3 ~

0 ~

3 (bright)

• Colour: (light) –3 ~

0 ~ 3 (deep)

•Hue: (red) –3 ~ 0 ~ 3 (green) Repeat steps 2 and 3 to adjust any other items.

* “1” softens the outlines of the images. “2” enhances the outlines and “3” enhances them more than “2.”

Playback

,continued 55