3 Press the number buttons to enter the PlusCode programming number, and press ENTER.
The date, start and stop times, programme position, recording mode, etc. setting (page 43) appear.
•If you make a mistake before pressing ENTER, press </, and
You can set the recorder to record in 30 minute increments.
Press z REC repeatedly to set the duration.
Each press advances the time in 30 minute increments. The maximum duration is six hours.
Recording Timer
•If you want to change the setting, press </, to select the item and press M/m to change the setting.
•If you want to
4 Select “OK,” and press ENTER.
The TIMER REC indicator lights up on the front panel, and the recorder is ready to start recording.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the recorder to stop recording.
If the timer settings overlap
See page 43.
To extend the recording duration time while recording
See page 43.
To confirm, change, or cancel a timer recording
See “Checking/Changing/Cancelling Timer Settings (Timer List)” on page 47.
zHint
The Rec Mode Adjust function also works with this timer method (page 43).
(normal recording)
The time counter decreases minute by minute to 0:00, then the recorder stops recording (the power does not turn off). Even if you turn off the recorder during recording, the recorder continues to record until the time counter runs out.
Note that the Quick Timer function does not work if “TV Direct Rec” is set to “On” in the “Recording” setup (page 92).
To cancel the Quick Timer
Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.
,continued 45