1 Press [TIMER]. | 4 Select “OK,” and press ENTER. |
| The “TIMER LIST” display (page 54) |
| appears. The TIMER REC indicator |
| lights up on the front panel and the |
| recorder is ready to start recording. |
| Unlike a VCR, there is no need to turn off |
| the recorder before the timer recording |
| starts. |
|
|
2 Press M/m to select the “Day and
Time” or “Mode” row. Then press
ENTER.
3 Select an item using </, and adjust using M/m. Then press ENTER.
To make additional changes to items in different rows, return to step 2. The adjustable items are listed below. “Day and Time”:
Sets the date, start time, and stop time, and selects the programme position or input source.
The date item changes as follows: Today y …… y Sat 28.10 (30 days
later) y Sun (every Sunday) y ……
ySat (every Saturday) y Mon - Fri (Monday to Friday) y Mon - Sat (Monday to Saturday) y Daily y Today
“Mode”:
Selects the recording mode (page 45). “Media”:
Selects the media, HDD or DVD. “Update” (HDD only):
Automatically records over a previously recorded programme that is set to be recorded, daily or weekly.
“Extend Time”:
Sets the duration in increments of 10 minutes, for a maximum of 60 minutes when a timer recording is in progress. If the programme set to be recorded daily or weekly is extended, the manually extended time set here will be added to the subsequent timer recording times.
• If you make a mistake, select the item and change the setting.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the recorder to stop recording.
Rec. Mode Adjust
If there is not enough available disc space for the recording, the recorder automatically adjusts the recording mode to enable the entire programme to be recorded. Set “Rec. Mode Adjust” of the “Timer Settings” to “On” in the “Recording” setup (page 100).
Auto Title Erase (HDD only)
If there is not enough space for a timer recording, the recorder automatically erases old titles recorded on the HDD. The oldest, played title is erased. Set “Auto Title Erase” of the “Timer Settings” to “On” in the “Recording” setup (page 100). Protected titles are not erased.
If the timer settings overlap
Overlapped timer settings are shown as follows.
To store the setting as shown, select “OK.” The programme that has a mark next to it has lower priority and will not be entirely recorded.
To cancel the overlapped setting, select “Cancel.”
To confirm, change, or cancel a timer recording
See “Checking/Changing/Cancelling Timer Settings” on page 54.
Recording Timer
,continued 47