“Info”:
Displays the timer setting information box along with the disc space required to record the whole programme (according to the selected recording mode).
Press O RETURN to return to the Timer List.
To change or cancel the setting, repeat steps 3 and 4 above.
When the timer settings overlap
The programme set last has priority.
Example: You set the timer in order of A, B, and C (setting C has first priority)
will be cut off
Actual recording
To scroll the list display by page (Page mode)
Press 
/
while the list display is turned on. Each time you press 
/
, the entire Timer List changes to the next/previous page of timer settings.
To turn off the Timer List
Press O RETURN.
zHint
For manual timer settings, you cannot modify the timer setting for the current recording, but you can extend the duration of the recording time while recording (page 48).
For timer settings using the EPG, you can modify the timer setting for the current recording while recording, but you cannot extend the duration of the recording (even when recording is stopped).
bNotes
•Even if the timer is set, timer recordings cannot be made while recording a programme that has priority.
•Even if the timer is set for the same daily or weekly programme, the timer recording cannot be
made if it overlaps with a programme that has priority. “ 
” will appear next to the overlapped setting in the Timer List. Check the priority order of the settings.
Auto Title Erase (HDD only)
If there is not enough space for a timer recording, the recorder automatically erases old titles recorded on the HDD. The oldest, played title is erased. Set “Auto Title Erase” of the “Timer Settings” to “On” in the “Recording” setup (page 100). Protected titles are not erased.
If the end time of one recording and the start time of another are the same
The end of programme A will be cut off.
56