Sony RDR-VX555 59

The display asks for confirmation.

The sub-menu appears.

1 Press TITLE LIST.

When editing a DVD-RW (VR mode) or DVD-R (VR mode), press ORIGINAL/ PLAYLIST to switch to the “Title List (Original),” if necessary.

2 Select a title, and press ENTER.

3 Select “A-B Erase,” and press ENTER.

The display for setting point A and B appears. “Start” is selected.

4 Press ENTER at the start point of the section to be erased (point A).

You can use H PLAY, ,

./>, x STOP, and X PAUSE to find the point. “End” is selected.

5 Press ENTER at the end point of the section (point B).

“Erase” is selected.

To reset the start or end point, select “Start” or “End” and repeat from step 4 or 5.

6 Press ENTER.

7 Select “OK,” and press ENTER.

The scene is erased.

To continue, repeat from step 4.

To finish, select “Finish,” and press ENTER.

zHints

•A chapter mark is inserted after the scene was erased. The chapter mark divides the title into separate chapters on either side of the mark.

•You can also erase a section of a Playlist title (page 63).

Notes

•Images or sound may be momentarily interrupted at the point where you erase a section of a title.

•Sections shorter than five seconds may not be erased.

•The start and end points of a title may be different from what you have set.

•The total playing time of the title does not change even if a scene was erased.

•If you erase an original title used in a Playlist, that Playlist is also erased.

Dividing a title into two (Divide Title)

+RW -RWVR-RVR

You can divide a title into two. Note that dividing original titles cannot be undone.

1 Press TITLE LIST.

When editing a DVD-RW (VR mode) or DVD-R (VR mode), press ORIGINAL/ PLAYLIST to switch to the “Title List (Original),” if necessary.

2 Select a title, and press ENTER.

The sub-menu appears.

3 Select “Divide Title,” and press ENTER.

The display for setting the dividing point appears.

“Point” is selected.

Editing DVD

,continued 59