Recording From Connected
Equipment With a Timer
(Synchro Rec)
You can set the recorder to automatically record programs from connected equipment that has a timer function (such as a satellite tuner). Connect the equipment to the LINE 1 IN jacks on the rear of the recorder (page 13).
When the connected equipment turns on, the recorder starts recording a program from the LINE 1 IN jacks.
VIDEO
1 2 3
4 5 6
7 8 9
0
SYSTEM
MENU
M/m/</,,
ENTER
8
9
10 Set the timer on the connected equipment to the time of the program you want to record, and turn it off.
11 Press SYNCHRO REC.
The SYNCHRO REC indicator lights up on the front panel and the recorder stands by for
The recorder starts recording when a signal is received from the connected equipment. When the connected equipment turns off, the recording stops and the recorder turns off.
To stop recording
Press x STOP twice.
To cancel
Press SYNCHRO REC before recording starts. The SYNCHRO REC indicator on the recorder turns off.
If you press SYNCHRO REC during Synchro- Rec, the recording stops, the SYNCHRO REC indicator turns off, and the recorder turns off.
x STOP
REC MODE
SYNCHRO
REC
1 Press VIDEO to operate the VCR.
2 Insert a tape with its safety tab in place.
3 Press REC MODE repeatedly to select the recording mode, “SP” or “EP.”
4 Press SYSTEM MENU while the recorder is in stop mode.
5 Select “Setup,” and press ENTER.
6 Select “Features,” and press ENTER.
The “Features” setup appears.
7 Select “Synchro Recording,” and press
ENTER.
If the timer settings of a
Regardless of whether or not the program is a
7:00 8:00 9:00 10:00
Program 1
Program 2
will be cut off
80