Sony RM-B750 Locations and Functions of Parts, Operation Panel

Locations and Functions of Parts

Operation Panel

3PANEL ACTIVE button

4STANDARD button

5Spare button

	6Test signal output select buttons
2MEMORY STICK lamp	7CLOSE button
1Memory Stick slot	8VTR START/STOP button
Rubber cap	9VTR playback control
	buttons

PANEL STANDARD	TEST	BARS CLOSE		VTR
ACTIVE				START/STOP
MEMORY
STICK
			AWB		ABB
			WHITE
MONITOR
FUNCTION			BLACK
VF DISP
MAINTENANCE
VF MENU
SCENE			IRIS/MB
CANCEL		AUTO			MASTER
		IRIS	ACTIVE
					BLACK
PAINT		EXT
ENTER
ALARM		IRIS
MENU SELECT	REMOTE CONTROL UNIT			RM-B750

qaMenu operation block	qdWhite balance/black
0ALARM indicator	balance control block
	qsIris/master black control block

1Memory Stick slot

Insert a Memory Stick to store setting data, such as reference files and scene files of the video camera or camera control unit.

2MEMORY STICK (Memory Stick access) lamp

The lamp shows the status of the Memory Stick. Off: No Memory Stick is inserted.

Lit in green: There is a Memory Stick in the slot. In this condition, you can safely eject the Memory Stick.

Lit in red: Data are being read/written. If you eject the Memory Stick in this condition, the data are not guaranteed. All the data may be lost.

For details on Memory Sticks, see page 24(E).

3PANEL ACTIVE button

Press to select the control mode for the connected camera system. Each time you press the button with the factory setting, the control mode cyclically switches among FULL, PART, and LOCK modes. FULL mode: All controls from this unit are enabled

(panel active status). Both this button and the IRIS/MB ACTIVE indicator in the iris/master black control block light.

PART mode: Controls only from the iris/master black control block are enabled (iris/master black active status). This button goes dark, but the IRIS/MB ACTIVE indicator stays lit.

LOCK mode: All controls from this unit are disabled (lock status). Both this button and the IRIS/MB ACTIVE indicator in the iris/master black control block go dark.

4(E)