To clear the memory of the remote
Press ?/1, AV ?/1 and MASTER VOL – at the same time. The USE MODE button flashes 3 times, then goes off.
Performing several commands in sequence automatically
— Macro Play
The Macro Play function lets you link several IR codes in a sequential order as a single command. The remote provides 2 macro lists (M1 and M2). You can specify up to 10 IR codes for each macro list.
Setting the sequence of IR codes
1 Press TV ?/1 while holding down USE
MODE.
The USE MODE button lights and “LEARN” appears in the display.
2 Move the easy scroll key to select “M1” or “M2”, then press the key to enter the selection.
3 Press the numeric buttons to select the macro step number.
For example, to program step 1, press 1. You can also move the easy scroll key to select the macro step number.
The USE MODE button blinks slowly.
4 Point the remote control code receiver section of the remote towards the receiver/transmitter on the remote control to be learned.
5 Press the appropriate button on the remote control to be learned to send the remote button code.
Lightly pressing the button once should be sufficient.
If learning is completed successfully, the USE MODE button slowly flashes twice and the remote automatically exits the macro setting mode.
When learning is not completed successfully, the USE MODE button flashes 4 times in quick succession and the procedure returns to step 5.
continued
Operations Remote Advanced