Sony RM-LG112 Troubleshooting, Specifications, 15GB, Information Additional, General, The remote does not function

Additional Information

Troubleshooting

If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

The remote does not function.

•The AAC BI-LING and 12 buttons are not available.

•Check that the mode of the remote corresponds to that of the receiver (page 14).

•Point the remote at the remote sensor on the component.

•Remove any obstacles in the path between the remote and the receiver.

•Replace both batteries in the remote with new ones, if they are weak.

•Make sure you select the correct input on the remote.

•When you operate a programmed non-Sony component, the remote may not function properly depending on the model and the maker of the component.

•Press MAIN MENU before you use the V/v/B/ b/ENTER/EXECUTE button for receiver operation (page 7).

Specifications

General

Remote control system	Infrared control
Power requirements	3 V DC with two R6
	(size-AA) batteries
Dimensions	210 × 49 × 27 mm
Mass (approx.)	85 g excluding batteries

Design and specifications are subject to change without notice.