Sony RM-PJM10, VPL-CX1 service manual Menu Items

1-
14	” Adjustments and Settings Using the Menu

Using the MENU

The projector is equipped with an on-screen menu for making various adjustments and settings. You can change the menu language displayed in the on-screen menu.

To change the menu language, see “Selecting the Menu Language” on page 20.

.When changing the adjustment level:

To increase the number, press the >or /key.

To decrease the number, press the . or ?key. Press the ENTER key to restore the original screen.

.When changing the setting:

Press the > or . key to change the

setting. Press the ENTER or ?key to restore

The PICTURE CTRL

Menu

The PICTURE CTRL (control) menu is used

for adjusting the picture.

Items that cannot be adjusted depending on

the input signal are not displayed in the

menu.

COLOR

Adjusts color intensity. The higher the

setting, the greater the intensity. The lower

the setting, the lower the intensity.

HUE

Adjusts color tones. The higher the setting,

the picture becomes greenish. The lower the

setting, the picture becomes purplish.

1	the original screen.
	Press the MENU key.

For details on the unadjustable items, see

page 40.

SHARP

Adjusts the picture sharpness. The higher the

The menu appears.
The menu presently selected is shown as
a yellow button.
	PICTURE CTRL		INPUT-A
		CONTRAST:	8 0
		BRIGHT:	5 0
		GAMMA MODE: GRAPHICS
		COLOR TEMP:	HIGH

2	Use the > or .key to select a menu,
	then press the / or ENTER key.
	The selected menu appears.
	Menus	Setting items

SET SETTING INPUT-A

STATUS:	ON
INPUT-A:	RGB
KEYSTONE MEMORY:	OFF
DIGITAL KEYSTONE:	OFF
LANGUAGE:	ENGLISH
POWER SAVING:	OFF
SIRCS RECEIVER:	FRONT&REAR
LAMP TIMER:	00010h

To clear the menu

Press the MENU key. The menu disappears automatically if a key is not pressed for one minute.

To reset items that have been adjusted

Press the RESET key. “Complete!” appears on the screen and the settings appearing on the screen are reset to their factory preset values. Items that can be reset are:

.“ CONTRAST,” “BRIGHT,” “COLOR,” “HUE,” and “SHARP” in the PICTURE CTRL menu

.“ DOT PHASE,” “SIZE,” and “SHIFT” in the INPUT SETTING menu

.“ DIGITAL KEYSTONE” in the SET SETTING menu

About the memory of the settings

The settings are automatically stored in the projector memory.

If no signal is input

When the video signal is input
	PICTURE CTRL		VIDEO
		CONTRAST:	8 0
		BRIGHT:	5 0
		COLOR:	5 0
		HUE:	5 0
		SHARP:	5 0
		D. PICTURE:	OFF
		COLOR TEMP:	LOW
		COLOR SYS:	AUTO
When the RGB signal is input
	PICTURE CTRL		INPUT-A
		CONTRAST:	8 0
		BRIGHT:	5 0
		GAMMA MODE: GRAPHICS
		COLOR TEMP:	HIGH

Menu Items

setting, the sharper the picture. The lower
the setting, the softer the picture.
D. (Dynamic) PICTURE	Adjustments
Emphasizes the black color.
ON: Emphasizes the black color to produce
a bolder “dynamic” picture.
OFF: Reproduces the dark portions of the
	and
picture accurately, in accordance with
the source signal.	Settings
GAMMA MODE
Selects a gamma correction curve.	Using
GRAPHICS: Improves the reproduction of
halftones. Photos can be reproduced in	the
natural tones.	Menu
TEXT: Contrasts black and white. Suitable
for images that contain lots of text.
COLOR TEMP
Adjusts the color temperature.
HIGH: Makes the white color bluish.

If there is no input signal, “NO INPUT– Cannot adjust this item.” appears on the screen.

3	Select an item.
	Use the >or .key to select the item,
	then press the / or ENTER key.
4	Make the setting or adjustment on an
	item.

VPL-CS2/CX1 GB 26 Using the MENU

CONTRAST

Adjusts the picture contrast. The higher the setting, the greater the contrast. The lower the setting, the lower the contrast.

BRIGHT

Adjusts the picture brightness. The higher the setting, the brighter the picture. The lower the setting, the darker the picture.

LOW: Makes the white color reddish.
COLOR SYS (System)
Selects the color system of the input signal.
. AUTO: NTSC3.58, PAL, SECAM and
NTSC4.43 (switched automatically)
. PAL-M/N:PAL-M/PAL-N and NTSC3.58
(switched automatically)
Normally, set to AUTO. If the picture is
distorted or colorless, select the color system
according to the input signal.
The PICTURE CTRL Menu	27	GB